Tennis Court Construction Perth

Line Marking Australia arranges tennis court construction in Perth for homes, clubs, schools and strata complexes. A new tennis court in Australia starts from about $40,000 (Oneflare cost guide, 2026). We scope the job, then a registered builder from our network of local builders in Western Australia handles the slab, surface, lines, net, fencing and lighting.

Perth has the space for tennis. Plenty of older blocks still have room for a full court, and many clubs are busy enough to need more. What Perth doesn't have is a forgiving climate for court surfaces.

Long, dry summers, fierce UV and sandy ground all shape how a Perth court should be built. Here is how we approach it, question by question.

How much does a tennis court cost in Perth?

A new tennis court in Perth starts from about $40,000, the lowest Australian figure in the Oneflare cost guide (2026). The final price depends on how much sand needs compacting or replacing, the slab, the surface you choose, and whether you add fencing and lighting. We itemise every part of a Perth quote.

Perth tennis job	Starting point	What moves the price
New tennis court	From about $40,000 (Oneflare, 2026)	Earthworks, base, surface, fencing, lights
Acrylic resurface of an existing court	From about $8,000 (Airtasker, 2026)	Crack repairs, number of coats, line colours
Synthetic grass court	Quoted per site	Base work, turf grade, sand infill
Lighting and fencing added	Quoted per site	Pole heights, light spill, fence height

What surface suits Perth's heat and UV?

For most Perth tennis courts, a UV-stable acrylic hard court on a concrete or asphalt base is the safest choice, because it holds its colour and plays the same all year. Synthetic grass is popular with clubs and families who want a softer feel. Lighter colours stay cooler underfoot through a Perth summer.

• Acrylic hard court: true bounce, easy to sweep, recoat roughly every 7 to 10 years (Tennis Australia's Victorian maintenance guides)
• Cushioned acrylic: extra rubber layers, kinder on knees for regular social players
• Synthetic grass: plays well after winter showers, needs brushing and sand top-ups, replaced roughly every 10 to 15 years

Tennis Australia sorts surfaces into categories in its National Court Surface Policy, and we use its guidance for club and community courts.

How does Perth's sandy soil change the build?

Perth's sandy coastal soils drain fast, which helps a tennis court, but loose sand moves if it isn't compacted properly. A Perth tennis court build usually starts with stripping topsoil, compacting the sand in layers and adding a crushed rock base before the slab or asphalt goes down. Pockets of limestone can slow excavation.

On sloping blocks in the hills suburbs the job changes again, with cut, fill and sometimes retaining walls. That is why we ask for photos and levels before giving a firm price.

Who needs a builder's licence for a tennis court in WA?

In Western Australia, building work worth $20,000 or more that needs a building permit must generally be done by a registered builder, according to the state's Building and Energy guidance. If the work doesn't need a permit, a registered builder isn't required. A new tennis court with fencing, lights or retaining walls often triggers a permit.

Building and Energy also says residential work that needs a permit and is valued over $20,000 requires home indemnity insurance. We arrange the build through our network of local builders who hold the WA registration the job needs and carry public liability insurance.

Do you need council approval for a tennis court in Perth?

Many Perth tennis courts need some form of local government approval, especially when they include light towers, fencing over about 2 m, retaining walls or a lot of earthworks. Building permits in WA are issued through the local government permit authority, and your council may also want a development application. Each Perth council has its own rules.

• Light spill onto neighbours, assessed against AS/NZS 4282
• Fence height and setbacks to boundaries
• Stormwater, which on sand usually means soakwells or on-site drainage
• Heritage or other overlays on older blocks

How long does it take to build a tennis court in Perth?

A new tennis court in Perth usually takes about two to four weeks on site once approvals are in place. Concrete or asphalt needs curing time before the acrylic or turf goes on. Perth's dry months make scheduling easier, while winter fronts can push back surfacing work by a few days.

1. Site visit, levels and design
2. Permits and a Before You Dig Australia check
3. Earthworks, compaction and base
4. Slab or asphalt, then curing
5. Surface, lines, posts and net
6. Fencing, lighting and handover

Should I resurface or rebuild my Perth tennis court?

Most older Perth tennis courts can be resurfaced rather than rebuilt if the base is sound. Fine cracks and faded acrylic are usually fixed with repairs and fresh coats, from about $8,000 (Airtasker cost guide, 2026). Wide cracks, sinking or root damage point to deeper base problems and a partial or full rebuild.

A resurface is also a good time to add pickleball lines. Tennis Australia and the National Pickleball League are converting tennis venues into multi-sport racquet hubs, and many Perth clubs and complexes are asking how to do the same.

Which Perth properties add tennis courts?

In Perth we hear most from families on larger blocks, tennis and community clubs adding or rebuilding courts, schools, strata complexes with an ageing shared court, and developers planning estate sports areas. Each has different priorities, from low upkeep at home to durability and night lighting for a club.

Clubs can read more on our sports courts for clubs page, and home owners on backyard sports courts. For the full detail on tennis builds, see our tennis court construction guide.

How we keep every tennis court build compliant in Perth

Every Perth tennis court we arrange follows the same compliance checklist, so nothing is left to chance. We check permits early, locate services before digging and make sure the builder holds the WA registration the job requires. The court is built to the standard doubles size of 23.77 m by 10.97 m, plus run-off.

• Local government planning and building permit requirements checked before the final quote
• Before You Dig Australia (BYDA) check before excavation
• Work Health and Safety laws, with Safe Work Method Statements for excavation and mobile plant
• Silica dust controls with water suppression or on-tool extraction when cutting concrete
• Sediment and stormwater controls, important on loose sandy sites
• Concrete to AS 3600, sports lighting to AS 2560.1:2018 and AS 2560.2:2021, light spill under AS/NZS 4282
• Accessible paths considered against AS 1428.1 for clubs and schools
• Tennis Australia guidance followed for club and community courts

What do you need from me to quote a tennis court in Perth?

To quote a Perth tennis court accurately, we need to understand the site, the court you want and any approvals already in place. Photos, a rough sketch and your suburb help us match the job to the right builder from our network and spot sand, slope or access issues early.

• New court, resurface or conversion to tennis and pickleball
• Court size, and whether you want full run-off
• What's on the ground now: lawn, old court, sand, limestone
• Slope, drainage and where stormwater can go
• Truck and machinery access to the site
• Preferred surface: acrylic, cushioned acrylic or synthetic grass
• Sports to mark, posts, net and equipment
• Fencing, lighting and power
• Council approvals, plans or photos you already have
• Timing and budget

For other court types, start with our sports court construction hub.