Pickleball Court Construction

Line Marking Australia builds pickleball courts for homes, clubs, schools, councils and retirement villages, and converts tennis courts to pickleball. A home pickleball court in Australia starts from around $20,000 installed. We handle the slab, cushioned or standard acrylic surface, 50 mm lines, posts, nets, fencing and lighting.

Pickleball is Australia's fast-growing racquet sport. Pickleball Australia reports more than 27,000 members and over 410 affiliated clubs and venues (June 2026), and AusPlay found about 92,000 Australians played in the year to June 2024. Clubs and councils can't build courts fast enough.

Whether you want one court in the backyard or a bank of courts at the club, here's what's involved.

How much does it cost to build a pickleball court in Australia?

A pickleball court in Australia costs from around $20,000 for a home court, with most single courts landing between $20,000 and $50,000 depending on the ground, the surface and extras such as fencing and lighting. Converting an existing tennis court to pickleball usually costs much less than building new.

Project	Typical starting point
Pickleball lines added to an existing tennis court	The lowest-cost option: line marking and portable nets only
Tennis court converted to dedicated pickleball courts (resurface + lines + nets)	From the cost of a tennis court resurface (acrylic recoats from about $8,000, Airtasker 2026)
New home pickleball court	From about $20,000 installed (published Australian builder pricing, 2026)
Club or council bank of courts with lighting and fencing	Quoted per site

The biggest price drivers are site preparation (slope, soft soil, tree roots), the slab, cushioned versus standard acrylic, fencing height and lighting. We itemise each one so you can choose what to include now and what to add later.

How much space do you need for a pickleball court?

A pickleball court is 13.41 m long and 6.10 m wide (44 ft by 20 ft), but you need more space than that to play safely. Plan for a total area of at least about 9.1 m by 18.3 m (30 ft by 60 ft) per court, and around 10.4 m by 19.5 m (34 ft by 64 ft) if you have the room, so players can chase wide and deep balls.

• Lines: 50 mm wide, all part of the court
• Non-volley zone (kitchen): 2.13 m from the net on each side
• Net height: 914 mm at the sidelines, 864 mm at the centre
• Orientation: north–south where possible, so the sun isn't in players' eyes

What is the best surface for an outdoor pickleball court?

The best outdoor pickleball surface in Australia is an acrylic hard court on a concrete or asphalt slab, with a textured finish for grip. Cushioned acrylic adds rubber layers that are easier on knees and backs, which is why clubs and retirement villages often choose it. Modular tiles are a fast option for backyards.

In hot, sunny parts of Australia, lighter colours stay cooler underfoot and a good UV-stable acrylic keeps its colour longer.

Can you convert a tennis court to pickleball?

Yes. A standard tennis court can take two pickleball courts with the tennis lines kept, or up to four dedicated pickleball courts with the tennis net removed and enough run-off. Most conversions need cracks repaired, a fresh acrylic coat, new lines in a contrasting colour and pickleball posts or portable nets.

Tennis Australia and the National Pickleball League are working together to turn tennis venues into multi-sport racquet hubs, so conversions are now one of the most common jobs we're asked about.

How long does it take to build a pickleball court?

A new outdoor pickleball court usually takes one to three weeks on site, including time for the concrete to cure before the acrylic goes on. A tennis-to-pickleball conversion can be done in a few days if the existing slab is sound. Wet weather can add time.

Do you need council approval for a pickleball court?

A pickleball court may need council approval in Australia, depending on your council, the earthworks, fencing height, lighting and how close it is to neighbours. Noise from paddles is a common concern near homes, so councils may ask about location, screening or hours of use. We check your local rules before you commit.

How we build every pickleball court to code

• Court dimensions to the widely used international rulebook (13.41 m × 6.10 m, 2.13 m kitchen)
• Before You Dig Australia check before excavation
• Slabs designed and poured to suit your soil, with falls for drainage (AS 3600 for concrete structures)
• Lighting designed to limit spill onto neighbours under AS/NZS 4282, with sports lighting to the AS 2560 series
• Accessible paths to the court considered against AS 1428.1
• Safe Work Method Statements for high-risk construction work and silica dust controls when cutting concrete
• Builders licensed for the job in your state, with public liability insurance

Backyard pickleball courts

A backyard pickleball court fits on many suburban blocks because it needs roughly a third of the space of a tennis court. We check your access for trucks and machinery, drainage, setbacks to the fence line and any council triggers, then build the slab, surface and lines. You can add fencing and lighting now or later.

Pickleball courts for clubs, schools, councils and retirement villages

For multi-court venues we plan the layout for run-off, spectator space, shade, seating, accessible paths and lighting for night play. Retirement villages often choose cushioned acrylic, shade and seating close to the court.

What do you need from me to quote a pickleball court?

Tell us whether it's a new court or a tennis conversion, how many courts, indoor or outdoor, what's on the ground now, truck access, preferred surface, lighting and fencing, any council approvals already in place, and your timing and budget. Photos and a sketch with rough measurements help us quote faster.