Warehouse Line Marking Services
Faded forklift lanes and invisible pedestrian walkways aren't just an audit problem. They're a serious incident waiting to happen. We've marked over 2 million square metres of warehouse floors across Australia, from small workshops to massive distribution centres. Every project is designed around your traffic flow, compliant with WHS requirements, and built to handle heavy forklift traffic for years.
Jamie (24/7 quotes): 0468 069 002AS 1742.2 Compliant
Fully Insured
24/7 Availability
15+ Years
Get FREE Quote
Fixed-Price Quote Within 48 Hours
Trusted by 5,000+ businesses
VicRoads approved · AS/NZS compliant · $20M insured
Compliance-Ready Guarantee: every job is marked to AS 1318 safety colours, dimensionally verified and delivered with full compliance documentation, backed by our 12-month workmanship guarantee.
Last updated:
Proper Warehouse Markings Are a WHS Requirement, Not a Nice-to-Have
Quick answer: Line Marking Australia marks warehouses across Australia, including forklift lanes, pedestrian walkways, pallet bays, loading docks and hazard zones. We match the material to the traffic and use two-pack epoxy where forklifts run all day. Most work is done at night, on weekends or between shifts, so your operation keeps running.
Recent warehouse jobs
- Gaythorne, QLD (October 2026): a new warehouse marked before move-in, with a container loading zone, forklift operating zones, walkways and A to K lane markings. See the Gaythorne job.
- Warana, QLD (October 2026): the factory floor was shot-blasted and ground, then marked with operator and office walkways, 4 pedestrian crossings, a work zone and 26 car bays outside. See the Warana job.
- Richlands, QLD (September 2026): keep-clear zones at 7 fire exits, walkways, two loading-dock chevron areas and 13 car bays. See the Richlands job.
- Preston, VIC (September 2026): forklift lanes and work zones marked around a working warehouse.
Marked overnight before a safety audit
A warehouse manager in Campbellfield called us at 7pm on a Friday after their safety audit was brought forward to Tuesday. The forklift lanes and pedestrian walkways had faded badly. We assessed the site Saturday morning, quoted by lunch and marked the floor Sunday night: 2,400 linear metres of safety markings in one eight-hour shift. The audit passed with zero non-conformances.
Why the material matters
Warehouse floors are hard on paint. Road-marking paint under constant forklift traffic can wear away within months, which is why we use two-pack epoxy or MMA in forklift lanes and turning areas, and lighter coatings where traffic is light. Matching the material to the traffic is what makes markings last.
Warehouse safety rules
The Model WHS Regulations require businesses to manage the risk of forklifts and people sharing space, and clear floor marking is one of the main controls. Safe Work Australia’s General guide for industrial lift trucks covers traffic management. Signs follow AS 1319. See our forklift lane marking, warehouse walkway marking, pallet bay marking and warehouses and factories pages.
Site Inspection
Free assessment and detailed quote
Professional Marking
Expert application with premium materials
Quality Assurance
Final inspection and compliance sign-off
Compliance Standards
Forklift & Pedestrian Separation Zones
WHS Regulations (model WHS Regulations 2011; OHS Regulations 2017 in Victoria). Work health and safety laws require you to separate people from mobile plant such as forklifts. Lane and walkway widths are set from your widest forklift and load, plus safe clearances, in your site traffic management plan.
Slip Resistance for Walkway Surfaces
AS 4586:2013, Slip resistance classification for pedestrian surfaces. AS 4586 rates how slip resistant a surface is, but it does not set a minimum. We pick marking products to suit wet or dry walkways, using the SA HB 198 guide.
Industrial Safety Colour Coding
AS 1318:1985, SAA Industrial Safety Colour Code. Yellow for caution/traffic lanes, red for fire/danger/stop, green for safety/first aid, blue for mandatory actions. Universal recognition across all industrial sites.
Loading Dock & Delivery Zone Marking
AS 2890.2:2018, Off-street commercial vehicle facilities. Covers service vehicle access, loading docks and keeping trucks apart from other vehicles in logistics areas.
Hazardous Materials Storage Zones
AS 3780:2023, Storage and handling of corrosive substances. Bunded areas, chemical storage zones, and spill containment areas require specific floor marking with appropriate colours and symbols.
Emergency Equipment & Exit Marking
AS 2444, Building Code of Australia, Fire equipment locations, emergency exits, and assembly areas must have clear floor marking. Keep-clear zones around fire extinguishers, hydrants, and electrical panels with high-visibility marking.
Fully Compliant & Certified
Warehouse and factory markings follow the Australian safety colour and workplace traffic standards
$20M Public Liability
$10M Professional Indemnity
5,000+ Projects
Since 2009
After-Hours Crews
No production downtime
Fixed Prices
Not Estimates
AS 1318
Safety Colour Code
Sets the safety colours for hazards, walkways and equipment zones, so markings mean the same thing on every site.
AS 1319
Safety Signs
Covers the design and use of safety signs and symbols, including floor-marked legends and pedestrian symbols.
WHS Regulations
Workplace Traffic
Separating forklifts from pedestrians is a duty under the model WHS Regulations; marked lanes and exclusion zones are how most sites do it.
AS 4586
Slip Resistance
Defines slip resistance classifications (P rating) for pedestrian surfaces. Critical for wet areas, ramps, and high-traffic zones.
What Our Clients Say
Results based on typical project outcomes. Individual results may vary.
Upload your site plans for a detailed quote within 48 hours
Get an accurate, fixed-price quote tailored to your specific project requirements
Frequently Asked Questions
There is no single number in the law. Lane width depends on your widest forklift and load, whether traffic is one-way or two-way, and the clearance you need on each side. Many sites end up with lanes of about 3.5 to 4 metres and walkways of at least 1 metre. Your traffic management plan should set the final widths. We measure your equipment and loads during site assessment to specify correct widths.
Standard acrylic floor paint is walkable in 2-4 hours, light traffic in 24 hours, full forklift traffic in 72 hours. Two-pack epoxy cures faster: walkable in 6-8 hours, full traffic in 24-48 hours depending on temperature. We plan around your operational schedule to minimize disruption.
Sometimes. If existing markings are well-adhered and you're not changing layout, we can paint over after thorough cleaning. If there's peeling, oil contamination, or layout changes, we recommend removal first. Painting over failing markings just means the new layer fails too. We assess during site visit and advise honestly.
Two-pack epoxy is a chemical-cure coating that bonds to concrete at molecular level. It's harder, more abrasion-resistant, and handles forklift traffic far better than acrylic paints. It costs more and requires proper mixing, but in high-traffic areas it lasts 3-5 times longer.
Yes, we work around operational warehouses all the time. We can mark in sections while other areas remain operational, work around fixed racking, and accommodate equipment that can't be moved. Our crews are experienced in working safely in active warehouse environments.
AS 1318 sets the safety colours: yellow for caution, red for fire equipment and danger, green for safety equipment and first aid, and blue for mandatory actions. AS 1318 does not set a colour for walkways, but white is the usual choice. Most warehouses use yellow forklift lanes with white pedestrian paths.
Expert Guides
In-depth compliance guides and resources related to warehouse line marking services.
Racking and Storage-Zone Floor Marking
Discover the essentials of warehouse storage zone marking in Australia. Learn standards, practical steps, and avoid common mistakes.
Read guidePhotoluminescent and Glow Line Marking Explained
Learn about photoluminescent and glow in the dark line marking for safety and compliance. Discover applications, standards, and how to get a quote.
Read guideAirport Apron and Hangar Floor Marking
Discover the art of airport hangar line marking with our detailed guide. We cover everything from standards to common mistakes, ensuring your hangar operates smoothly.
Read guideRecent Projects
Real warehouse line marking services projects completed by our team.
New Warehouse Fit-out Marking: Gaythorne QLD
Gaythorne, QLD · 279 m of bay lines, 11 lanes
View case studyWarehouse Safety Marking: Two Warehouses in Richlands QLD
Richlands, QLD · 2 warehouses, inside and out
View case study
Warehouse Floor Marking: 2,400m Safety Lines Campbellfield
Campbellfield, VIC · 2,400 linear metres
View case studyIndustries We Serve
We provide warehouse line marking services across these industry sectors.
Related Services
Epoxy & MMA Coatings
Learn more about this service
Forklift & Vehicle Lanes Line Marking
Learn more about this service
Hazard & Exclusion Zones Line Marking
Learn more about this service
Pallet Bays & Staging Line Marking
Learn more about this service
Warehouse and Safety Line Marking Adelaide
Learn more about this service
Warehouse Walkway Line Marking
Learn more about this service
More Warehouse Line Marking Services
Ready to Get Your Line Marking Sorted?
Upload your site plans and receive a fixed-price quote within 48 hours. No surprises, no cost blowouts, just clear pricing you can take to your committee or manager.
Or call us directly: 0417 460 236