Safety Line Marking Australia
Compliant safety marking for workplaces nationwide. Hazard zones, traffic management, pedestrian protection.
Jamie (24/7 quotes): 0468 069 002AS 1742.2 Compliant
Fully Insured
24/7 Availability
15+ Years
Get FREE Quote
Fixed-Price Quote Within 48 Hours
Trusted by 5,000+ businesses
VicRoads approved · AS/NZS compliant · $20M insured
Compliance-Ready Guarantee: every job is marked to AS/NZS 2890 & AS 1742, dimensionally verified, and delivered with full compliance documentation, backed by our 12-month workmanship guarantee.
Last updated:
What is Safety Line Marking That Protects Workers?
Quick answer: Line Marking Australia marks workplace safety lines across Australia: yellow forklift lanes, white pedestrian paths, red hazard zones and hatched exclusion areas. The layout is based on how traffic actually moves on your site and supports your duty to manage forklift risks under the Model WHS Regulations. Most work is done after hours or during production shutdowns.
A food processing plant in Adelaide had a near-miss incident. A forklift reversed into a pedestrian walkway that was not clearly marked. The worker escaped injury, but the incident triggered a SafeWork SA investigation. Faded floor markings were identified as a contributing factor.
We assessed the facility over a weekend, mapped all traffic flows, and designed a comprehensive marking system. Yellow forklift lanes, white pedestrian paths, red hazard zones, blue storage areas. Clear hierarchy, unmistakable separation. Applied over three consecutive nights during production shutdown.
WorkSafe signed off on the improvements. More importantly, workers now have clear visual guidance about where they can safely walk. That is what safety marking is really about: creating an environment where people do not get hurt because the rules are obvious. Safe Work Australia’s General guide for industrial lift trucks lists keeping people and forklifts apart as a key control.
Site Inspection
Free assessment and detailed quote
Professional Marking
Expert application with premium materials
Quality Assurance
Final inspection and compliance sign-off
Compliance Standards
Safe Work Australia
Workplace traffic management guidelines.
AS 1742.2
Traffic control devices for general use.
AS 4586
Slip resistance requirements for safety.
State WHS Acts
State workplace health and safety legislation.
AS 1428.1:2021
Access and mobility requirements.
Fully Compliant & Certified
All our work meets or exceeds Australian Standards and state road authority requirements
VicRoads Approved
Registered Contractor
$20M Public Liability
$10M Professional Indemnity
5,000+ Projects
Since 2009
Fixed Prices
Not Estimates
AS 1742
Traffic Control Devices
Specifies line colours, widths, arrow designs, and placement for road markings. Ensures all traffic control devices meet national safety standards.
AS/NZS 2890
Parking Facilities
Covers bay dimensions (2.4m × 5.4m standard, 2.4m × 5.4m accessible plus a 2.4m shared zone), aisle widths, and traffic flow requirements for compliant parking areas.
AS 4586
Slip Resistance
Defines slip resistance classifications (P rating) for pedestrian surfaces. Critical for wet areas, ramps, and high-traffic zones.
AS/NZS 1428
Access & Mobility
Sets requirements for accessible parking bays, tactile indicators, and mobility access. Essential for DDA compliance and accessibility audits.
What Our Clients Say
Results based on typical project outcomes. Individual results may vary.
Upload your site plans for a detailed quote within 48 hours
Get an accurate, fixed-price quote tailored to your specific project requirements
Frequently Asked Questions
Industry standard uses yellow for forklift and vehicle lanes, white for pedestrian paths, red for hazard and exclusion zones, blue for storage areas. We follow Safe Work Australia guidelines.
For genuine safety issues, we prioritise fast. We have completed emergency marking within 48 hours of initial contact. Call Niel directly on 0417 460 236 for urgent situations.
Yes. We design and apply all safety marking to meet Safe Work Australia guidelines and state WHS requirements. We provide compliance documentation showing the standards met.
With proper materials and application, 3-5 years in typical industrial conditions. High-traffic areas may need touch-ups sooner. We use heavy-duty epoxy for maximum durability.
Yes. We apply appropriate hazard identification marking including chemical-resistant coatings, bunding lines, and hazmat identification.
No single Australian standard sets warehouse floor marking colours. Line Marking Australia uses a common scheme of yellow for forklift lanes, white for pedestrian paths and red for hazard zones, and matches it to your site traffic management plan. Safety signs follow AS 1319, and carpark markings follow AS/NZS 2890.1:2004.
Yes. Line Marking Australia applies safety line marking after hours, overnight, on weekends or during planned shutdowns so your site keeps running. Larger facilities are staged across several nights, and you get a fixed-price quote within 48 hours of sending your plans or photos.
Related Services
Carpark Line Marking Laverton
Learn more about this service
Warehouse Line Marking Epping
Learn more about this service
Warehouse Line Marking Tullamarine
Learn more about this service
More Safety Line Marking Services
Ready to Get Your Line Marking Sorted?
Upload your site plans and receive a fixed-price quote within 48 hours. No surprises, no cost blowouts, just clear pricing you can take to your committee or manager.
Or call us directly: 0417 460 236