Line Removal That Actually Eliminates Ghosting
Changing your carpark layout? Old lines showing through new paint? Ghosting creates confusion and looks unprofessional. We use high-pressure water blasting and mechanical grinding to remove old markings completely, leaving a clean surface for fresh marking. Proper removal is the difference between professional results and a mess that shows through for years.
AS 1742.2 Compliant
Fully Insured
24/7 Availability
15+ Years
Get FREE Quote
Fixed-Price Quote Within 48 Hours
Trusted by 5,000+ Businesses
What is Proper Removal Matters More Than You Think?
Key Benefits
Site Inspection
Free assessment and detailed quote
Professional Marking
Expert application with premium materials
Quality Assurance
Final inspection and compliance sign-off
Compliance Standards
Environmental Protection for Waste Water
EPA Victoria Guidelines, Water blasting waste water contains paint particles and must be contained and disposed of properly. We capture waste water and dispose according to EPA requirements.
Carpark Remarking Standards
AS/NZS 2890.1:2004, Parking facilities Part 1: Off-street car parking. When removing lines for layout changes, the new layout must still meet this standard.
Work Health & Safety During Removal
WHS Regulations 2017, Work Health and Safety requirements for operating high-pressure water equipment and grinding machinery. Our operators are trained and follow safe work procedures.
Road Surface Protection
Austroads Guide to Pavement Technology, Guidance on maintaining road surface integrity during line removal operations. Water pressure and grinding depth must not damage the underlying pavement structure.
Dust Control During Grinding
AS/NZS 1269.1:2005, Occupational noise management and dust control requirements during mechanical grinding operations. We use dust suppression techniques where grinding is required.
Stormwater Protection
Environment Protection Act 2017, Prevention of pollutants entering stormwater systems. Line removal waste must not discharge to stormwater drains or waterways.
Fully Compliant & Certified
All our work meets or exceeds Australian Standards and state road authority requirements
VicRoads Approved
Registered Contractor
$20M Public Liability
$10M Professional Indemnity
5,000+ Projects
Since 2009
Fixed Prices
Not Estimates
AS 1742
Traffic Control Devices
Specifies line colours, widths, arrow designs, and placement for road markings. Ensures all traffic control devices meet national safety standards.
AS/NZS 2890
Parking Facilities
Covers bay dimensions (2.4m × 5.4m standard, 3.2m × 5.4m accessible), aisle widths, and traffic flow requirements for compliant parking areas.
AS 4586
Slip Resistance
Defines slip resistance classifications (P rating) for pedestrian surfaces. Critical for wet areas, ramps, and high-traffic zones.
AS/NZS 1428
Access & Mobility
Sets requirements for accessible parking bays, tactile indicators, and mobility access. Essential for DDA compliance and accessibility audits.
What Our Clients Say
4.9/5 from 500+ reviews
Results based on typical project outcomes. Individual results may vary.
Upload your site plans for a detailed quote within 48 hours
Get an accurate, fixed-price quote tailored to your specific project requirements
Frequently Asked Questions
You can, but we don't recommend it for layout changes. Black paint over white lines will fade at different rates, and within 12-18 months you'll see ghosting of the old layout. For simple remarking over existing lines in the same position, painting over is fine.
Water blasting uses high-pressure water (3500-4000 PSI) to strip paint without damaging the underlying surface. Grinding physically removes the top layer of surface along with the paint. It's needed for thicker coatings, thermoplastic, or where water containment isn't practical.
Time depends on area, coating type, and method. Water blasting typically removes 50-100 linear metres per hour for standard paint. Thermoplastic takes longer. Grinding is slower but more thorough.
Water blasting at correct pressure removes paint without damaging good-quality asphalt or concrete. Grinding does remove a thin layer of surface material but creates a slightly textured finish that actually improves paint adhesion.
We capture all waste water using containment systems and vacuum recovery. The contaminated water is transported to licensed waste facilities for treatment. No discharge to stormwater drains.
Yes, thermoplastic usually requires mechanical grinding rather than water blasting due to its thickness and adhesion. Grinding removes the thermoplastic along with a thin layer of surface. The area is then ready for new markings.
Related Services
Body Corporate Line Marking That Keeps Everyone Happy
Learn more about this service
Carpark Line Marking
Learn more about this service
Road Line Marking
Learn more about this service
Shopping Centre Compliance Line Marking
Learn more about this service
Thermoplastic Marking That Lasts 4-6 Years Under Heavy Traffic
Learn more about this service
Warehouse Line Marking Services
Learn more about this service
More Line Marking Removal Services
Ready to Get Your Line Marking Sorted?
Upload your site plans and receive a fixed-price quote within 48 hours. No surprises, no cost blowouts, just clear pricing you can take to your committee or manager.
Or call James directly: 0468 069 002