Pedestrian Crossing Line Marking on Private Sites: What You Can and Can't Do

Yes, you can mark a pedestrian crossing in a private car park or workplace, but the markings have to match your approved plan and work as a safety control. Here's where they go and what they need.

8 min readBy Nizi Bhandary

Need this marked on your site? See Pedestrian Crossings Line Marking or get a fixed-price quote within 48 hours.

Pedestrian Crossing Line Marking on Private Sites: What You Can and Can't Do

Yes, you can mark a pedestrian crossing on private property, and plenty of car parks, shopping centres and workplaces do. The catch is that what you paint has to work as a safety control and match whatever your council approval or WHS traffic plan already says. Get that wrong and you've spent money on stripes that drivers ignore.

Can you paint a pedestrian crossing in a private car park?

Yes. Owners and managers mark pedestrian crossings in private car parks and workplaces all the time. What you can do is limited by your development approval, the Australian Standards your design was approved against, and your duty to keep people safe on site. Treat the markings as part of a traffic plan, not decoration.

Say you manage a strata block with a visitor car park and a path that cuts straight across the main aisle to the lift lobby. Residents have been walking that line for years, so there's no point pretending they'll walk somewhere else. A marked crossing there tells drivers where to expect people and tells walkers where the safest place to cross is. That's the whole job of the thing.

Do the road rules apply in a private car park?

Often, yes. Under the Australian Road Rules, a car park open to the public is generally treated as a road-related area, so drivers still have to give way to pedestrians where the rules require it. Private ownership doesn't switch the rules off. It does mean a painted crossing's real power is visibility, not a fine.

One motoring article puts it plainly: the rules don't distinguish between public and private property for a shopping centre car park. The RAA makes a similar point, noting that car parks are shared spaces between pedestrians and cars where road rules still apply. State rules differ in detail, so if you need a ruling on a specific site, ask your council or a lawyer.

What does that mean for you as the owner? A crossing doesn't create the duty to give way. It makes the expectation obvious, at the exact spot where you want people to cross.

What's the difference between a crossing and a marked walkway?

A crossing is a short marked strip where people cut across a vehicle path. A walkway is a longer marked route that runs alongside or through vehicle space, like a path through a warehouse or a lane along a car park edge. They solve different problems, and most sites need a bit of both.

MarkingWhere it goesWhat it doesTypical extras
Zebra-style crossingAcross a main aisle or entry drivewayShows drivers where people will crossSignage, stop line, good lighting
Marked walkwayAlong a building edge or through a work areaKeeps people out of the vehicle pathBollards, rails or kerbing
Warehouse walkwayBetween docks, racking and amenitiesSeparates pedestrians from forkliftsBarriers, mirrors at blind corners
Raised or coloured crossingHigh-risk spots such as school drop-offSlows vehicles, boosts visibilitySpeed humps, signage

What do the standards say about crossing markings?

For off-street car parks, the main reference is AS/NZS 2890.1, which includes pavement markings such as pedestrian crossings in its design requirements. Road-style crossings follow AS 1742.10, the pedestrian part of the Manual of Uniform Traffic Control Devices. Your approved plan and council conditions decide which applies to your site.

Here's the honest bit. These are paid standards, so we're not going to quote clause dimensions from memory. For context, a 2021 New Zealand gazette notice describes its 600 mm crossing marking as one that harmonises New Zealand with Australian practice, which tells you 600 mm bars and gaps are the road-style benchmark. Your site may differ, so work from the approved drawing and the council's conditions, not from a number you read online.

We cover road dimensions in more detail in our guide to zebra crossing line marking dimensions.

Where should a pedestrian crossing go in a car park?

Put it where people already walk, at a point drivers can see them from a safe distance. Common spots are between the car park and the entrance, across the main aisle to a lift lobby, and where a footpath meets a driveway. A crossing in the wrong place gets ignored, and then it's decoration.

When we walk a site for the first time, we watch where people actually go before we look at the plans. Stand at the entrance on a weekday morning and you'll see the real desire lines quickly. People cut diagonals. They take the shortest path to the door. If your crossing is 15 metres from that line, they'll walk past it.

  • Visibility. Keep parked vehicles, trolley bays and planting out of the sightline on both sides.
  • Lighting. A crossing nobody can see at 6pm in winter is a hazard.
  • Accessibility. The crossing needs to link to kerb ramps and accessible bays so a wheelchair user isn't left at a kerb.
  • Speed. A crossing on a long straight aisle needs help slowing traffic, such as signage or a hump.

If you're mapping the whole layout, our car park line marking guide covers bays, aisles and flow in one place.

How do you mark safe pedestrian walkways in a warehouse or factory?

Separate people from forklifts and other vehicles wherever you can, and mark what's left. Workplace safety guidance puts physical separation first and paint second. Paint on its own marks a route but doesn't stop a vehicle, so busy sites usually combine it with barriers, bollards or rails.

SafeWork NSW's guidance on traffic management risk assessment says the most effective way to move people and vehicles safely is to provide separate pedestrian and vehicle traffic routes. Where barriers are used, it says they should be permanently fixed and difficult to defeat. It also recommends clearly marking walkways and crossings with paint or bollards, using signs or reflective paint to mark vehicle areas, and fitting mirrors at sharp or blind bends. Where separation isn't practical, it suggests timing work so people and vehicles aren't in the same area at the same time.

Picture a distribution warehouse where the amenities block sits across the dock apron from the offices. Staff walk that apron every shift, forklifts run it every shift. That's a crossing that needs painted bars, a stop line for the forklifts, a keep-clear zone, and probably a mirror or a bollard line so nobody steps out from behind a pallet. Our warehouse walkway marking and width guide goes deeper.

What paint and materials suit a pedestrian crossing?

Crossings take more wear than almost any other marking on a site, because every vehicle drives over the same strip, over and over. The material needs to handle traffic, keep its grip when wet and stay visible. Match it to the traffic: standard paint for light-use car parks, tougher systems for forklifts and heavy vehicles.

  • Standard line marking paint works for lower-traffic car parks and gets re-marked on a regular cycle.
  • Two-pack epoxy suits high-traffic areas such as forklift routes and dock aprons, where ordinary paint wears through.
  • Thermoplastic is common on road-style crossings that need long life and good night visibility.
  • Anti-slip additive matters on any crossing that gets wet. White paint on smooth concrete is slippery in the rain.

Whatever you choose, prep decides how long it lasts. Paint over dust, oil or old flaking lines and it'll peel, usually along the wheel tracks.

What mistakes do people make with pedestrian crossing line marking?

The big ones are putting the crossing where nobody walks, marking it with nothing else around it, using the wrong material for the traffic, and painting over old lines so the site ends up with two conflicting layouts. Each one is avoidable if you plan the job before the crew turns up.

  • Wrong location. The crossing is tidy and logical on the plan, but people walk 15 metres away.
  • Paint only. In a busy yard, stripes without a barrier or stop line rely entirely on drivers paying attention.
  • Ghost lines. New markings go over old ones that weren't removed, and now there are two layouts. Drivers and walkers each pick one.
  • No accessible link. The crossing ends at a kerb with no ramp.
  • Skipping the plan. The council approval had a specific layout, and the "improved" version doesn't match it.
  • Cheapest material on the busiest strip. It wears out early, and you're doing it again.

How do you get a pedestrian crossing quoted?

Send us the site plan or an aerial view, tell us what traffic uses the area, and mark where people walk. We'll price the crossing, any stop lines, removal of old markings and prep as one scope. We quote from plans, so a site visit usually isn't needed to get a number.

It helps if you tell us when the area can be closed. Most crossings are on busy aisles, so we often work early mornings, nights or weekends to keep your site running. Describe the access constraints and any approval conditions up front, and the quote reflects them.

What should you do next?

Walk your site at its busiest time and note where people actually cross. Check that spot against your approved plan or WHS traffic plan. Then work out what the area needs: bars, a stop line, signage, barriers or all of it. If it's a crossing, a pedestrian crossing line marking job is usually a quick scope to price.

Ready to price it? Upload your plans and we'll come back with a fixed price. Get a fixed-price quote and tell us where people walk.

Need Professional Line Marking?

Upload your site plans and get a fixed-price quote within 48 hours. AS/NZS compliant. No call-out fees.

Frequently Asked Questions

What is pedestrian crossing line marking?

Pedestrian crossing line marking is the painted or applied pattern, usually bars, that shows where people should cross a vehicle path. On private sites it's paired with signs, stop lines or barriers. It makes the crossing point obvious to drivers and gives walkers a safer, predictable place to cross.

Can I paint a pedestrian crossing in my private car park?

Yes. Owners and managers mark crossings in private car parks regularly. What you can mark depends on your development approval, the Australian Standards your design followed and your safety duties. Check your approved plan first so the new markings match it, and plan the crossing as part of the traffic layout.

Do the road rules apply in a shopping centre car park?

Often, yes. Under the Australian Road Rules, a car park open to the public is generally a road-related area, so drivers still have to give way to pedestrians where the rules require. State rules differ in detail, so check with your council or a lawyer for a specific site.

What size are the stripes on a pedestrian crossing?

Road-style crossings in Australia use wide bars with gaps between them, and a 2021 New Zealand notice describes 600 mm bars as harmonised with Australian practice. Private sites can differ. Use the dimensions on your approved drawing or council conditions, and confirm against AS/NZS 2890.1 or AS 1742.10.

Which standard covers pedestrian crossings in car parks?

AS/NZS 2890.1 covers off-street car parking, including pavement markings such as pedestrian crossings. AS 1742.10 covers pedestrian control and protection on roads. Which one applies depends on your site and what your approval says, so work from the approved plans and ask your certifier if unsure.

Is paint enough to separate pedestrians from forklifts?

Usually not on a busy site. Workplace safety guidance prefers separate pedestrian and vehicle routes, with fixed barriers where needed, and treats paint and bollards as the way to mark crossings and walkways. Paint shows the route but can't stop a vehicle, so combine it with barriers, mirrors or stop lines.

How long does a pedestrian crossing last before it needs repainting?

It depends on traffic, material and prep. A crossing on a busy aisle wears faster than any other marking because every vehicle drives over it. Tougher materials such as epoxy or thermoplastic last longer than standard paint, and poor surface prep shortens the life of any of them.

How do I get a pedestrian crossing line marking quote?

Upload your site plan or an aerial view at our quote page, mark where people walk and tell us what traffic uses the area. We price the crossing, stop lines, removal of old markings and prep as one scope and give you a fixed price, usually without a site visit.

Need this done? Get a fixed-price quote in 48 hours

Tell us where and what you need. AS/NZS compliant, no call-out fees, and a real fixed price — not an estimate that changes at invoicing.

Or call 0417 460 236Jamie (24/7 quotes): 0468 069 002

Compliance-Ready Guarantee: every job is marked to AS/NZS 2890 & AS 1742, dimensionally verified, and delivered with full compliance documentation, backed by our 12-month workmanship guarantee.

Fixed price within 48 hours · No call-out fees · No spam

NB

Written by

Nizi Bhandary

Line Marking Specialist, Line Marking Australia

Nizi Bhandary is a line marking specialist with Line Marking Australia, working hands-on across car park, warehouse, road and sports-court projects nationwide. Nizi focuses on AS/NZS 2890 and AS 1742 compliant work and writes these guides to help facility managers, builders and councils get compliant, long-lasting line marking — without the guesswork.

Our Line Marking Services

Professional services related to the topics covered in this guide:

Ready to Get Your Line Marking Sorted?

Upload your site plans and receive a fixed-price quote within 48 hours. No surprises, no cost blowouts, just clear pricing you can take to your committee or manager.

Call Now: 0417 460 236